SW-2000D
Rotary Arm Wrapping Machine
An in-line rotary-arm wrapper for conveyor-fed lines: the pallet stays still on the conveyor while the arm carries the film around it at up to 35 loads an hour.
- Packaging Size (L×W)
- 1,000–1,200 × 1,000–1,200 mm
- Packaging Height
- 700 – 2,000 mm
- Packaging Efficiency
- 15 – 35 pallets/hour
- Arm Speed
- 0 – 15 rpm
- Conveyor Height
- 500 mm
- Installed Power
- 2.1 kW
Why this model
Four things that decide whether it is the right machine for you
Load stays still
The arm rotates around a stationary pallet, so tall, heavy or unstable loads are never spun.
Up to 35 loads/hour
Arm speed 0–15 rpm with a 1.1 kW helical-gear motor and electromagnetic brake for accurate stopping.
Conveyor interlock
Standard dry-contact I/O for load-in, load-out and ready — the wrapper is a station, not a side machine.
Pneumatic seal
Pneumatic film clamping plus constant-temperature heated-wire sealing with a floating heater block.
About the SW-2000D
Full engineering description(expand)
Some loads simply cannot be spun: tall stacks, half-full drums, unstable bags, anything heavy with a high centre of gravity. The SW-2000D solves that by keeping the load still on the conveyor and rotating the arm instead. A pneumatic clamp grips the film tail, a constant-temperature heated wire with a floating heater block seals it, and the cycle runs end to end without an operator. Inovance PLC control gives programmable top and bottom wrap counts and automatic height sensing; the 1.1 kW helical-gear arm motor with an electromagnetic brake positions accurately at 0–15 rpm. Standard dry-contact I/O interlocks with your conveyor for load-in, load-out and ready states, so the wrapper behaves like another station on the line rather than something bolted next to it.
Standard features
- In-line conveyor design: load stationary while the rotating arm applies the film
- Pneumatic film clamping with constant-temperature heated-wire sealing and floating heater block
- Inovance PLC with programmable top/bottom wrap counts and automatic height sensing
- Arm 0–15 rpm VFD controlled, 1.1 kW helical-gear motor with electromagnetic brake
- Powered pre-stretch carriage, adjustable lift and film speeds, up to 200 %
- Standard dry-contact I/O signals for conveyor interlock
- Full guarding with safety fence and light curtain options
Advantages at a glance
- Stationary load means heavy and unstable pallets are wrapped safely
- Up to 35 pallets an hour for high-throughput dispatch
- Fully automatic film feed, cut and seal — no operator at the machine
- Dry-contact I/O makes integration with your conveyor straightforward
- Compact gantry frees floor space next to the line
- Same film and same pre-stretch carriage as the turntable models
Need the datasheet?
We send the full SW-2000D datasheet, a layout drawing for your site and a budget price — usually within one working day.
Built to your order
- Voltage and frequency to your site standard
- Siemens, Mitsubishi or Inovance controls
- Film width, turntable diameter and colour set at order
- English manual, CE declaration and spare-parts list
Technical data
SW-2000D specifications
Values below are for the standard configuration. Anything marked customisable can be changed at order — ask us before you design around it.
Identification
- Model
- SW-2000D
- Certification
- CE Certified
Performance
- Packaging Efficiency
- 15 – 35 pallets/hour
- Arm Speed
- 0 – 15 rpm
- Lift Speed
- 0 – 68 mm/s (VFD adjustable)
- Pre-stretch Ratio
- Up to 200 %
Dimensions & weight
- Packaging Size (L×W)
- 1,000–1,200 × 1,000–1,200 mm
- Packaging Height
- 700 – 2,000 mm
- Conveyor Height
- 500 mm
- Machine Weight
- 1,500 kg
Power & control
- Installed Power
- 2.1 kW
- Power Supply
- AC 380 V, 3-phase, 5-wire, 50/60 Hz
- Air Supply
- 0.6 – 0.8 MPa
- PLC / VFD / HMI
- Inovance
Consumables & environment
- Stretch Film
- LLDPE machine film, 500 mm wide, 0.02–0.03 mm
- Film Roll Max. Outer Diameter
- φ240 mm
- Machine Colour
- Main: RAL 7035 / Moving parts: RAL 1003
Options for this model
Configure the SW-2000D around your load
Automatic top-sheet + top-press head
Adds a driven top-film head and a pneumatic press plate so the load is held square while a PE cover sheet is applied and sealed.
In the field
Where the SW-2000D earns its keep
Jumbo reel wrapping in a paper mill
A cylinder wrapper spirals film around the full circumference of the reel while driven rollers turn the load — six-side protection with no manual handling.
Roll wrapping cell commissioned on site
Control cabinet, HMI and powered rollers installed and levelled in the customer's plant, with the operator trained on the actual production recipe.
SW-2000D — buyer questions
Can it work without a conveyor?+
It can be fed by forklift with a floor-level infeed station, but the SW-2000D is designed for conveyor feed and performs best on a line.
How does it handle different pallet heights?+
A photoelectric sensor measures the load on entry and the PLC applies the recipe stored for that height band.
Get a SW-2000D quotation
Tell us your load, your aisle and your throughput and we will confirm the model, the options you actually need, and a delivery date.