SW-2000D
Automatic Top-Covering Wrapping Machine
A heavy-duty turntable wrapper with an integrated top-sheet module: it lays a PE cover over the load and welds it to the stretch film in the same cycle.
- Turntable Diameter
- φ2,000 mm
- Turntable Height
- 95 mm
- Packaging Size (L×W)
- 1,300×1,200 / 1,400×1,200 mm
- Top-Covering Height
- 1,000 – 2,000 mm
- Load Capacity
- 2,000 kg
- Machine Weight
- 1,500 kg
Why this model
Four things that decide whether it is the right machine for you
Five-side protection
A PE cover sheet is applied and welded to the stretch film, so the top of the load is sealed as well as the sides.
250 % pre-stretch
The highest film yield in the range — the carriage stretches film to three and a half times its length.
Wireless remote cycle
The whole wrap-and-cover cycle starts from a handheld remote; the operator never has to stand at the panel.
2 000 kg, φ2 000 mm
A 2000 mm turntable takes 1300×1200 and 1400×1200 loads without a change of deck.
About the SW-2000D
Full engineering description(expand)
Dust and rain do not stop at the sides of a pallet, which is why the SW-2000D adds a top-covering module to a 2000 kg turntable wrapper. A pneumatic head pulls a PE cover sheet across the load, a hot-wire cutter releases it, and the stretch film is wrapped over the sheet edge so the two are sealed into a single skin. The result is five-side protection — top, four sides — in one uninterrupted cycle, started from a wireless remote. Pre-stretch runs up to 250 %, top-covering height is adjustable between 1000 and 2000 mm, and the photoelectric height sensor keeps the cover positioning repeatable whatever the load.
Standard features
- PLC and touchscreen control with programmable wrapping layers and cycle counts
- Wireless remote starts the complete wrap-and-cover cycle
- Powered pre-stretch carriage, film yield up to 250 %
- Pneumatic top-film feeding with hot-wire cutting and automatic film clamping into the next cycle
- Photoelectric height sensing for precise cover positioning
- VFD turntable drive 4–12 rpm, soft start/stop with automatic reset
- Cold-storage and high-humidity executions available
Advantages at a glance
- Wrap and cover sheet completed in a single pass
- Top of the load protected against dust, rain and tampering
- 250 % pre-stretch gives the lowest film cost per pallet in the range
- Remote-controlled cycle keeps the operator clear of the machine
- Adjustable covering height suits mixed pallet heights on one line
- Built on the same platform as the SW-2000D pallet wrapper, so parts are common
Need the datasheet?
We send the full SW-2000D datasheet, a layout drawing for your site and a budget price — usually within one working day.
Built to your order
- Voltage and frequency to your site standard
- Siemens, Mitsubishi or Inovance controls
- Film width, turntable diameter and colour set at order
- English manual, CE declaration and spare-parts list
Technical data
SW-2000D specifications
Values below are for the standard configuration. Anything marked customisable can be changed at order — ask us before you design around it.
Identification
- Model
- SW-2000D
- Certification
- CE Certified
Performance
- Turntable Diameter
- φ2,000 mm
- Load Capacity
- 2,000 kg
- Turntable Speed
- 4 – 12 rpm (VFD adjustable)
- Top-Covering Efficiency
- 15 – 25 pallets/hour
- Pre-stretch Ratio
- Up to 250 %
Dimensions & weight
- Turntable Height
- 95 mm
- Packaging Size (L×W)
- 1,300×1,200 / 1,400×1,200 mm
- Top-Covering Height
- 1,000 – 2,000 mm
- Machine Weight
- 1,500 kg
Power & control
- Installed Power
- 3.4 kW
- Power Supply
- AC 380 V, 3-phase, 5-wire, 50/60 Hz
- Air Supply
- 0.4 – 0.6 MPa
- PLC / VFD / HMI
- Inovance
Consumables & environment
- Stretch Film
- LLDPE pre-stretch film, 500 mm wide, 0.020–0.035 mm
- Top Film
- PE film, 1,800 mm wide, 60–80 μm
- Film Core Inner Diameter
- φ76.2 mm
Options for this model
Configure the SW-2000D around your load
Pneumatic top press
Holds light, tall or unstable stacks stable during rotation — available on every turntable model.
Integrated weighing system
Load-cell platform with a digital display — capture the net weight of every pallet during the wrap cycle.
Explosion-proof execution
Ex-proof motors, junction boxes and controls for solvent, coating and chemical plants.
In the field
Where the SW-2000D earns its keep
Heavy roll sealed on a turntable cell
Turntable wrapper with a powered pre-stretch carriage sealing an oversized roll before dispatch. Installed, wired and commissioned by our own engineers.
Roll wrapping cell commissioned on site
Control cabinet, HMI and powered rollers installed and levelled in the customer's plant, with the operator trained on the actual production recipe.
SW-2000D — buyer questions
Can it wrap without the cover sheet?+
Yes. The HMI lets the operator run wrap-only cycles, so you can use the cover sheet only for loads that need weather protection.
What top film does it use?+
A 1800 mm wide PE cover film, 60–80 μm. It is a plain cover film, not stretch film, so it is inexpensive per pallet.
Get a SW-2000D quotation
Tell us your load, your aisle and your throughput and we will confirm the model, the options you actually need, and a delivery date.