By end-of-arm tooling · Cobot palletizing
Bag clamp palletizer for 30 kg sacks
In short
A clamp tool grips a sack from both sides, so woven bags, paper sacks and flour bags are palletized without vacuum. iPack cells with bag clamps handle 30 kg per pick at 8–10 cycles a minute and stack to 2,600 mm with the lift-axis models.
- Side-clamp fingers for woven, paper and laminated sacks
- 30 kg per pick, 8–10 cycles a minute
- Stack height 2,000 mm, or 2,600 mm with the 500° lift axis
- One mobile frame — wheel it between bagging lines with a pallet truck
Grips what vacuum cannot
Porous and dusty sack surfaces hold with fingers, not cups.
30 kg per pick
Matched to the standard 25–30 kg bagging line.
Moves between lines
Arm, cabinet and pallet base on one frame, shifted with a pallet truck.
No programming
Bag and pallet dimensions on the touchscreen generate the pattern in about five minutes.
Bag handling with a clamp tool
| Item | Value |
|---|---|
| Bag type | Woven, paper, laminated sacks |
| Payload | 30 kg per pick |
| Cycles | 8–10 per minute |
| Stack height | 2,000 / 2,600 mm |
| Pattern setup | About five minutes on the panel |
In the field
Photographed on customer floors
Buyer questions
What buyers ask before ordering
Why use a clamp instead of vacuum for bags?
+
Sacks are porous and their surface is not airtight, so a vacuum cup leaks. A side clamp grips the bag body mechanically, which is why bag lines use fingers or a clamp rather than cups.
What bag weights can it handle?
+
30 kg per pick on the clamp tool, which covers the standard 25–30 kg bagging line used for grain, flour, feed and chemicals.
Can it palletize two bag sizes on one pallet?
+
Yes. A mixed pattern is stored as another recipe and recalled from the same touchscreen, so no programmer is needed between products.
Does it need a fence?
+
That is a risk assessment on your layout, not a fixed answer. Light curtain, radar and fixed fencing are all offered and quoted with the cell.
Send us the load. We will size the machine.
Load dimensions, weight and the rate the line has to keep up with are enough for a machine recommendation and a firm quotation.